|
200 memory channels and 10 memory banks
Up to 200 regular memory channels can be stored with a 6-character
channel name, tone and duplex settings. The memory channels
can be tagged with A-J bank name and allows you easy channel
management. In addition, use Icom’s exclusive DMS (Dynamic Memory
Scan) system to scan selected memory banks by simply adding
and deleting bank links.
Built-in CTCSS/DTCS
Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow
you to access a closed repeater. The pocket beep alerts you when
a matched tone frequency is received. The tone scan detects the
tone frequency used in the receiving frequency.
Other features
- NOAA weather channel receive * (* IC-V82 USA version only)
- Automatic repeater function (USA version only)
- Reversible control knob and up/down buttons assignment
- Durable construction and simple operation
- 16 DTMF dial memory
- PC cloning capability
SPECIFICATIONS
|
GENERAL |
|
Frequency range |
| : |
|
Version |
IC-V82 |
IC-U82 |
|
USA |
Tx 144-148 MHz
Rx 136-174 MHz
*Guaranteed range 144-148MHz |
Tx 420-450 MHz
Rx 400-479 MHz
*Guaranteed range 440-450MHz |
|
Europe |
144-148 MHz |
Tx 430-440 MHz |
|
|
| Mode |
: F3E, F2D,
F7W |
| Number of
memory ch. |
: 207 (6 scan
edges, 1 call) |
| Antenna
connector |
: BNC (50
ohm) |
| Power supply |
: 7.2 V DC
(6.0 —10.3V DC acceptable, Icom's battery pack only)
|
| Frequency
stability |
: ±2.5 ppm
-10°C to +60°C |
|
Current drain (at 7.2 V DC) |
| : |
|
|
IC-V82 |
IC-U82 |
|
Tx |
High(7W/5W) |
2.6A |
2.0A |
|
Rx |
Max.Audio |
250mA |
250mA |
|
Standby |
80mA |
80mA |
|
Power save |
30mA |
30mA |
|
|
|
Usable temp. range |
: -10°C to +60°C |
Dimensions
(projections not included) |
: 54(W) × 139(H)
× 36.7(D) mm
|
|
Weight |
: 390g
(with BP-222N) |
| |
|
TRANSMITTER |
Output power (at
7.2 V DC)
|
| : |
|
|
IC-V82 |
IC-U82 |
|
High |
7.0W |
5.0W |
|
Mid |
4.0W |
2.0W |
|
Low |
0.5W |
0.5W |
|
|
|
Spurious emissions |
: Less than -60
dB |
|
Max. freq. deviation |
: ± 5KHz/ ±
2.5KHz (Wide/Narrow) |
|
Ext. MIC connector |
: 3-conductor
2.5(d) mm (1⁄10″)/2.2k ohm |
| |
|
RECEIVER
|
|
Receive system |
:
Double-conversion super heterodyne |
|
Intermediate
frequencies |
: 1st 46.35 MHz
2nd 450 kHz |
|
Sensitivity (at 12dB SINAD) |
: 0.16 µV typ. |
|
Squelch sensitivity (at threshold) |
: 0.11µV typ. |
|
Selectivity |
: more than
55/50dB (Wide/Narrow) typ. |
|
Inter modulation |
: 65dB type. |
|
Spurious and
Image rejection |
:
80dB (typ.; VHF), 70dB (typ.; UHF) |
|
Audio output power |
: 300 mW typ.
with an 8 ohm load |
|
Ext SP connector |
: 3-connector 3.5
(d) mm /8 ohm |
|
Exp Data connector |
: 3-connector 2.5
(d) mm |
Supplied accessories:
- Antenna
- Belt clip
- Desktop charger*
- Battery case or battery pack*
*Depending on version
All stated specifications are subject to change without notice or
obligation.
OPTIONS
-
BATTERY CASE AND BATTERY PACKS
|
MODEL |
BP-208N |
BP-209N |
BP-210N |
BP-211N |
BP-222N |
|
Type |
6×AA(LR6) |
Ni-cd |
Ni-MH |
Li-Ion |
Ni-cd |
|
V/Ah |
|
7.2V/1100mAh |
7.2V/1650mAh |
7.4V/1800mAh |
7.2V/600mAh |
|
Battery
Life |
VHF(7W) |
- |
3
h 20 min |
6
h |
6
h 10 min |
2
h 15 min |
|
UHF(5W) |
- |
3
h 40 min |
7
h |
8
h 15 min |
2
h 50 min |
|
Battery life is approx. time.; Tx (Hi): Rx: standby=1:1:8
power save function when set at auto
BC-146 + BC-147E DESKTOP CHARGER + AC ADAPTER
Charges the battery pack, BP-209N, BP-210N or BP-222N with/without
transceiver in 12, 18.5, 6.5 hours (approx.), respectively.
The BC-147 AC ADAPTER is additionally required. Cannot
charge Li-Ion battery pack, BP-211N.
BC-144N + BC-145E DESKTOP CHARGER + AC ADAPTER
For rapid charging of battery pack, BP-209N, BP-210N or BP-222N.
An AC adapter, BC-145, is supplied with the charger depending on
version. Cannot charge Li-Ion battery pack, BP-211N. Charging
time: 1.5 to 2 hours. BC-119 is also available for rapid
charging.
BC-121 + AD-101 + BC-124 DESKTOP CHARGER +
DESKTOP CHARGER ADAPTER + AC ADAPTER
For rapid charging of up to 6 battery packs (including
BP-211N). An AC adapter, BC-124, may be supplied, depending
on version. Charging time: 1.5 to 2 hours. Six AD-101s are
required.
HM-75A/HM-131L/HM-128L SPEAKER-MICROPHONES
HM-75A: Allows you to remotely select operating channels, etc.,
according to cloning.
HM-131L: Compact and durable body. Equipped with an earphone
jack and a revolving clip.
HM-128L : Lightweight earphone-microphone.
HS-94/HS-95/HS-97 + VS-1L EARHOOK-HEADSET + VOX/PTT
CASE
HM-94: Earhook headset with flexible boom microphone.
HM-95: Behind-the-head headset with flexible boom microphone.
HM-97 : Throat microphone fits around your neck and picks up
speech vibration.
MB-86/103 BELT CLIP
MB-86: Alligator type clip. Same as supplied.
MB-103: Swivel belt clip.UT-108
DTMF DECODER
Provides DTMF decode capability with code squelch and pager
operation.UT-114
/ 118 DIGITAL UNITS
UT-114: With voice scrambler.
UT-118: Without voice scrambler.CS-V82
+ OPC-478/U CLONING SOFTWARE + CLONING CABLE
Provides quick and easy programming of memory channel, names,
etc. OPC-478U is USB cable type.
OPC-474 CLONING CABLE
Used for handheld-to-handheld data cloning.SP-13
EARPHONE
Provides clear audio in noisy environments.
DV-Dongle coderen en
decoderen
|
 |
 |
 |
 |
 |
|
BC-146 |
BC-144N |
BC-121 |
HS-94 |
HS-95 |
 |
 |
 |
 |
 |
|
HM-75A |
HM-131L |
HM-128L |
HS-97 |
VS-1L |
 |
 |
 |
 |
 |
|
MB-86 |
MB-103 |
UT-108 |
UT-114
|
UT-118 |
|