Vorige Omhoog Volgende

 Startpagina

Prijslijst

 IC-F7000
               Export only
HF TRANSCEIVER

Advanced selective call and ALE make HF communication easier than ever!
 

The IC-F7000 is an HF land mobile transceiver especially designed for long distance communications. such communications used to require specially skilled operators, but the IC-F7000 makes HF LMR operation simple and efficient with the following advanced functions and features.

Selective call
Uses a unique calling address like a telephone number and allows you to make a call directly to a desired station or group. Compatible with other brands of radios.

ALE (Automatic Link Establishment) function
This function will check frequency propagation and strength to automatically select the highest quality signal for the best communication possible.

Versatile configuration
The controller and speaker are separated from the main unit. Also, the size of the main unit in particular has been reduced, so that the IC-F7000 can be installed almost anywhere. The main unit is only 72mm in height, so there is almost no limit to the places where the IC-F7000 can be set-up. The supplied hand microphone, HM-146, allows you to control most of the IC-F7000 functions
 

Large and clear indication with the dot-matrix LCD
All operational and status information is easily viewed on the full dot-matrix LCD. Editing a message or reading a received message are made easy. Also 10 levels of LCD backlighting are available for clear and bright illumination.

125W of powerful RF output
A full 125W of output power is available for reliable long distance communication. An effective cooling mechanism allows continuous transmission at full output power.

Ample memory channels>
The IC-F7000 stores 400 channels, 100 ALE channels, 100 telephone numbers, 100 Selcall IDs and 120 ALE IDs. 20 pagecall with up to 64-character messages and 20 ALE, including up to 90-character ALE AMD messages are stored.

General coverage receiver
Wide band, general coverage receive capability is available from 0.5 to 29.999MHz.

Automatic tuning antenna
The AT230 automatic tuning antenna is recommended for use with the IC-F7000. The AT230 fully covers 2 to 30MHz. It is also easily installed to a vehicle.

Digital Signal Processor (DSP)
The DSP allows flexible filter setting for J2B (AFSK), F1B (FSK) communication. Optional filters are not required for improved filter performance.

Other capabilities available with selective call and ALE

Selcall Make an individual/group call using a unique 4-digit (or 6-digit) address. The receiving station sends back an acknowledge (ACK) signal and the scanning stops to allow you to communicate.
Selective call Uses a unique calling address like a telephone number and allows you to make a call directly to a desired station or group. Compatible with other brands of radios.
GPS beacon call GPS beacon call*1 allows you to request the intended ID station to send position information. The receiving station automatically sends back position information.
GPS position call GPS position call*1 allows you to send your own position information to the intended ID station.
Status call Status call*1 requests to send radio status information including power supply voltage, output power and VSWR. This allows you to monitor the radio station from a remote location.
Pagecall Pagecall*1 allows you to send and receive up to 64-character text messages with the intended ID station. Received messages are recorded in the memory of the radio.
Telcall Telcall*2 allows you to make a telephone call through a telephone interconnect service provider. Up to a 16-digit telephone number can be programmed.
Emergency selcall Allows you to broadcast an emergency signal with own position information.
RFDS emergency call The RFDS (Royal Flying Doctor Service) emergency call uses a 2-Tone signal for an emergency call.
ALE sounding Automatically sends a sounding signal at a certain interval (0.5 to 16 hours) to check the channel propagation and stores the data in a table.
ALE individual/net call Automatically selects the best available channel using the ALE table and establishes a connection. The ALE system complies with the basic requirements of MIL-STD 188-141-B (Appendix A).
ALE AMD (Automatic Message Display) Allows you to send and receive up to a 90-character text message using the ALE function. Received messages are stored in the memory of the radio.

*1 GPS position call, GPS beacon call, Pagecall and Status call use Icom original commands. These calls may not be compatible with other brands.
*2 Please consult with a telephone interconnect service provider for details.

Other features

  • GPS input (NMEA0183 version 3.01)
  • External 32MHz reference input for accurate tuning
  • Voice, S-meter and Call mute
  • Optional antenna tuner, AT-140 available with antenna element, AH-2b

Brochure (4016kB) Handleiding (1955kB)
SPECIFICATIONS
 
 GENERAL
Frequency coverage : Receive   0.5-29.9999(continuous)MHz
  Transmit   1.6-29.9999*MHz 
  * Some frequency ranges are not guaranteed.
Type of emission : J3E (USB, LSB), J2B (AFSK),
  F1B (FSK), A1A (CW), A3E (AM)
Temperature range : -10°C to +60°C
Antenna Impedance : 50 (SO-239)
Frequency stability : ±50Hz (at -10°C to 60°C)
No. of Channels : 400 regular channels,
  100 ALE channels
Power supply voltage : 10.8 to 15.6 V DC (negative ground)
Current drain (at 13.8V DC)
: 
  Tx Rx
2-Tone Voice Max.Audio
General 1.6-3.9MHz 17A 12A 3.0A
4.0-29.9MHz 16A 11A
Dimensions
 (projections not included)		 : Main unit
    240(W) × 72(H) × 239(D) mm
  Controller
    150(W) × 50(H) × 51(D) mm
  Speaker
    106(W) × 62(H) × 46(D) mm
Weight (approx.) : Main unit  4.6 kg
  Controller  0.22 kg
  Speaker  0.37 kg
 TRANSMITTER
Output power (Selectable)
: 
General
 		   1.6-3.9MHz
4.0-29.9MHz		   125, 50, 10W PEP
100, 50, 10W PEP
Spurious emissions : -43dB below peak output power
Carrier suppression : 40dB below peak output power
Unwanted sideband suppression
  (with 1500Hz AF Input)		 : 50dB below peak output power
Microphone impedance : 600 Ω
 RECEIVER
Sensitivity (pre-amp. ON)
: 
Frequency Range (MHz) J3E
(at 20dB SINAD)		 A3E
(at 20dB SINAD)
 0.5 - 1.5999 25.1µV emf
12.6µV		 200µV emf
100µV
 1.6 - 29.9999 1.0µV emf
 0.5µV		 __
Squelch sensitivity
 (at S-meter)
: 
J3E (at 13.800MHz)

A3E (at 1.000MHz)
 		   Less than 10µV (threshold)
Less than 32mV (tight)
Less than 32µV (threshold)
Less than 320mV (tight)
Spurious response rejection ratio
 (1.6-29.9999MHz)		 : More than 70dB
Audio output power (at 13.8V DC) : 4.0W typical at 10% distortion with a 4Ω load
Clarity variable range : ±150Hz
SP connector : 2-conductor 3.5 (d) mm  / 4Ω

All stated specifications are subject to change without notice or obligation.
Measurements made in accordance with AS/NZS4770-2000. (Australia version only)

Supplied accessories

  • Hand microphone
  • DC power cable
  • Spare fuses
  • Key plugs
  • ACC cable
OPTIONS
  • PS-60 DC POWER SUPPLY
    Provides 13.6V DC (30A) output from an AC outlet.
  • AT-140 HF AUTOMATIC ANTENNA TUNER
    Covers 1.6-30MHz with a 7m (23 ft) or longer wire antenna.
    AT-130/E is also available.
  • AH-2b ANTENNA ELEMENT
    For mobile operation with the AT-140 or AT-130/E. All bands between 7-30MHz can be matched.
  • MN-100 ANTENNA MATCHER
    Match the transceiver to a dipole antenna without applying DC power. 8m × 2 antenna wires come attached.
  • UT-106 DSP UNIT
    Provides DSP functions such as noise reduction and auto notch. Already built-in to some versions.
  • MN-100L ANTENNA MATCHER
    Match the transceiver to a longwire antenna without applying DC power. 15m×1 antenna wire comes attached. Provides audible confirmation of frequency and mode in English.
  • AH-710 FOLDED DIPOLE ANTENNA
    Covers from 1.9 to 30MHz. Has an SO-239 connector. Easy to assemble (non-kink construction).
  • HM-146 HAND MICROPHONE/RC-26 REMOTE CONTROLLER
    Remote function microphone and remote controller head. Same as supplied.
  • SP-25 EXTERNAL SPEAKER
    External speaker. Same as supplied. Input impedance: 4Ω. Max. input power: 7W.
  • OPC-1286 SHIELDED CONTROL CABLE
    10m (32.8ft) shielded control cable connects between AT-140 and transceiver.
  • OPC-1287 SHIELDED CONTROL CABLE
    5m (16.4ft) shielded control cable connects between Moonraker AT230 and transceiver.

    Recommended option
  • AT230 AUTOMATIC TUNING ANTENNA
    (Moonraker Australia Pty. Limited) 2.6m length mobile mount whip antenna covers 2–30MHz with automatic tuning function. Continuous CW transmission at high power not guaranteed with AT230.
 
AH-710 AT-130/E AH-2b MN-100  
UT-106 HM-146 OPC-1286 OPC-1287 OPC-1289
 
OPC-478 OPC-478U CS-F7000   PS-60