|
Powerful 55W/50W output power
Individual MOS-FET power amplifier modules supply the power for Icom's
most powerful dual band mobile with 55W/50W (VHF/UHF). Stable power for
long distance communications plus reduced power settings (15/5W) for
local communications.
Wideband receiver
See why Icom has a world renowned reputation for superb wideband
receivers with the IC-E208. The IC-E208 wideband receiver covers
118-173, 230-549 and 810-999MHz* as
standard. Listen to your Amateur VHF/UHF bands, as well as aviation,
marine, weather and other utility communications in a compact mobile
package. Extends your mobile radio enjoyment!
* Excluding Cellular range
Detachable front panel
Limited installation space is no problem with the IC-E208H. The separation cable, OPC-600/R, is supplied with the radio allowing the
compact remote control head* to be installed almost anywhere.
* 111 (W) × 40(H)
× 26.3 (D) mm
500 alphanumeric memory channels
With this much memory, you can fill your IC-E208 with your favorite
frequencies and operation settings such as output power, tone, and more!
Then name each memory channel with up to 6 characters for quick channel
identification.
Improved Dynamic Memory Scan (DMS) system
The improved DMS system allows you to scan all the selected banks you
want to scan by simply adding/deleting bank links with Icom’s exclusive
Bank Link system. Yet another convenient feature to make the IC-E208 more
practical radio.
User friendly design
The large multi-function tuning knob provides intuitive channel tuning
or band hopping. The multicolor display lighting and backlit buttons adds
a new ‘fun’ dimension to operating the IC-E208.
HM-133, remote control microphone
The supplied HM-133 remote control microphone allows you to control
almost every function of the IC-E208 from the mic.
And more...
- Built-in CTCSS and DTCS tone squelch
- Pocket beep and tone scan
- Selectable squelch delay
- FM narrow capability
- RF attenuator linked to the squelch control
- 16 DTMF memory channels (24 digits per channel)
- 1200bps & 9600bps data connector (mini DIN 6-pin)
- 1750Hz tone capability for auto repeater function
|
SPECIFICATIONS
| GENERAL |
| Frequency coverage |
| : |
|
Version |
Guaranteed
range |
Rx working
range |
|
Europe |
144-146,430-440 |
118-173.995, 230-549.995,
810-999.990 |
|
Italy |
144-146,430-434, 435-438 |
118-173.995, 230-549.995,
810-999.990 |
(Unit: MHz)
|
|
| Mode |
: FM, AM*
*RX only; not guaranteed |
| Number of memory
channels |
: 512 (Including 2 call and 10
scan edges) |
| Antenna impedance |
: 50
(SO-239) |
| Power supply
requirement |
: 13.8V DC ±15% |
| Usable temperature
range |
: -10°C to +60°C |
| Frequency
stability |
: ±10ppm (-10°C to +60°C) |
| Tuning step
increments |
: 5, 10, 12.5, 15, 20, 25, 30,
50, 100 and 200kHz |
| Current drain (at
13.8V DC) |
| : |
Receive
Transmit |
Stand-by
Max. audio output
High (VHF/UHF) |
0.8A
1.0A
12A/11.5A |
|
|
| Dimensions
(Projections not included; W × H × D) |
: 141 × 40 × 185.4mm |
| Weight (approx.) |
: 1.2kg |
|
| TRANSCEIVER |
| Output power |
: VHF 55W, 15W (approx.), 5W (approx.)
selectable
UHF 50W, 15W (approx.), 5W (approx.) selectable |
| Max. frequency
deviation |
: ±5.0kHz (wide), ±2.5kHz (narrow) |
| Spurious emissions |
: Less than -60dB |
| Microphone
impedance |
: 600
(8-pin modular jack) |
|
| RECEIVER
|
| Intermediate
frequencies |
: 1st/2nd 46.05MHz/450kHz |
| Sensitivity (at
12dB SINAD) |
: Less than 0.18µV (144/430MHz
band only) |
| Squelch
sensitivity |
: Less than 0.13µV (at
threshold;144/430MHz band only) |
| Selectivity (Wide/Narrow) |
: More than 12/6kHz at -6dB
Less than 30/20kHz at -60dB |
| Spurious rejection
ratio |
: More than 60dB |
| Audio output (at
13.8V DC) |
: More than 2.0W at 10%
distortion with an 8
load |
| Ext. speaker
connector |
: 2-conductor 3.5 (d) mm 8 |
Supplied accessories:
- Hand microphone, HM-133
- 3.5m (11.5ft) separation cable, OPC-600/R
- DC power cable, OPC-1132
- Mounting bracket
- Spare fuse (20A)
All stated specifications are subject to change without notice or
obligation.
OPTIONS
SEPARATION ACCESSORIES
-
- OPC-600/R, OPC-601/R SEPARATION CABLES / For operation with the
front panel detached. OPC-600/R: 3.5m; OPC-601/R: 7.0m
- MB-58 REMOTE CONTROL HEAD BRACKET / Mounts the remote control
head in a convenient location for operation with the front panel detached.
- MB-65/120 MOUNT BASE / Mounts the remote control head with the
MB-58. Adjustable angle and direction for optimum positioning.
- OPC-1132, OPC-347 DC POWER CABLES / OPC-1132: 3.0m; OPC-347:
7.0m
MICROPHONE ACCESSORIES
-
- HM-118N HAND MICROPHONE / Regular hand microphone.
- HM-118TN DTMF MICROPHONE.
- HM-133 REMOTE CONTROL MICROPHONE
Full remote control microphone with keypad backlighting.
- OPC-440, OPC-647 MIC EXTENSION CABLES / OPC-440: 5.0m; OPC-647:
2.5m
- OPC-589 MIC ADAPTER CABLE / Allows you to connect an 8-pin
microphone.
OTHER ACCESSORIES
-
- CS-208 CLONING SOFTWARE + OPC-478/OPC-478U CLONING CABLE
For quick and easy programming of memories, etc. OPC-478: RS-232C cable;
OPC-478U: USB cable
- OPC-474 CLONING CABLE / Transceiver to transceiver cloning
cable.
- MB-17A MOBILE MOUNTING BRACKET
- SP-7 EXTERNAL SPEAKER / for base station (cable 1m)
- SP-10 EXTERNAL SPEAKER / all round (cable 1,5m)
- OPC-441 SPEAKER EXTENSION CABLE / 5.0m
|
|