Vorige Omhoog Volgende  

Startpagina

Prijslijst

IC-910H

Folder in pdf (531K) Handleiding in pdf (3.447K)
The New Dimension in the VHF/UHF World!

IC-910H 100W of stable output power
A powerful 100W* of output power is provided by the newly designed power amplifier circuit, which employs bipolar transistors in parallel. The combination of the aluminum die-cast chassis and effective cooling fan ensures stable output for continuous operation.
* 75W on 430MHz band and 10W on 1200MHz band

High performance receiver
The IC-910H offers 0.11µV of high sensitivity (at 10db S/N on SSB, CW mode), while the image and spurious responses are minimized for good signal fidelity. Used with the optional preamplifiers for each band, indispensable for obtaining weak signals in DX or satellite communication, you will experience top class receiving characteristics in the VHF/UHF bands.

Tuner UX-910Ready-to-install 1200MHz BAND UNIT
By installing the optional UX-910 1200MHZ BAND UNIT, the IC-910H becomes an all mode tri-band transceiver. You can also enjoy cross band and full duplex operation. Measuring only 241(W)×94(H)× 239(D) mm, and weighting 4.5kg (without UX-910)*, its compactness and light weight is convenient for field operation.
* approx; 91.2(W)×311.16(H)×913.32(D) in.; 929.32lb

9600bps packet operation
The IC-910H has two data sockets for simultaneous two band packet communications. Setting of the packet communication can be made easily in the set mode.

Satellite communication
In the satellite mode, the down/up link frequencies are displayed on the MAIN and SUB band respectively. Reverse/normal tracking and doppler shift compensation are standard, and 10 satellite memory channels store down/up link frequencies and operating mode.

 And more
  • All receiver functions, including IF shift, sweep, noise blanker, RF attenuator, also work in the SUB band
  • The sweep function observes conditions around the set frequency
  • 4 types of scanning are activated on each band independently
  • The memory pad stores the operating frequencies and modes temporarily
  • Electronic keyer with a dot/dash ratio control is built-in
  • FM-narrow mode receivable (except 1200MHz band)
  • 50 CTCSS tone encoder/decoder and one touch repeater function
  • Optional UT-106 DSP UNIT available
  • CI-V capability for PC control
SPECIFICATIONS
 
GENERAL
Frequency coverage
: 
Version 144MHz band 430MHz band 1200MHz band*1
Europe 144.0-146.0 430.0-440.0 1240.0-1300.0
U.S.A. Tx: 144.0-148.0
Rx: 136.0-174.0*		 Tx: 430.0-450.0
Rx: 420.0-480.0*		 Tx: 1240.0-1300.0
Rx: 1240.0-1320.0
Australia 144.0-148.0 430.0-440.0 1240.0-1300.0
Sweden 144.0-146.0 432.0-438.0 1240.0-1300.0

*Guaranteed range: 144.0-148.0MHz; 430-450MHz

Mode : SSB, CW, FM, FM-N*2
Frequency stability : ±3ppm (-10°C to +60°C)
Frequency resolution : SSB, CW   1Hz
  FM   100Hz
No. of memory channels : 328*1
 (99 regular, 1 call, 6 scan edges for each band plus 10 satellite memories)
Operating temperature range : -10°C to +60°C ; +14°F to +140°F
Power supply requirement : 13.8V DC ±15% (negative ground)
Current drain (at 13.8 V DC) : Transmit high
    23.0A (8.0A at 1200MHz band*1)
    low 7.0A (4.5A at 1200MHz band*1)

  Receive max.audio
    2.5A (3.5A at 1200MHz band*1)
    stand-by 2.0A (3.0A at 1200MHz band*1)
 
Dimensions
(projections not incl.)		 : 241(W)×94(H)×239(D) mm ; 9 1/2(W)×3 11/16(H)×9 13/32(D) in.
Weight (approx.) : IC-910H 4.5kg ; 929.32lb
  UX-910 0.85kg ; 17.8lb
Antenna connector : VHF SO-239 (50)
  UHF Type-N (50)
 TRANSMITTER
Output power
(continuously adjustable)		 : 144MHz band 5.0-100W
  430MHz band 5.0-75W
  1200MHz band*1 1.0-10W
Modulation system : SSB   Balanced modulation
  FM   Variable reactance modulation
Spurious emission : 144, 430MHz band   Less than .60dB
  1200MHz band*1   Less than .50dB
Carrier suppression : More than 40dB
Unwanted sideband : More than 40dB
Microphone connector : 8-pin connector (600)
 RECEIVER
Receiver system : VHF
    SSB, CW Single conversion superheterodyne
    FM Double conversion superheterodyne
  UHF
    SSB, CW Double conversion superheterodyne
    FM Triple conversion superheterodyne
Intermediate frequencies : (Unit: MHz)
 Mode  MAIN band SUB band
1st 2st 3st 1st 2st 3st
144MHz band SSB 10.8500 - - 10.9500 - -
CW 10.8491 - - 10.9491 - -
FM 10.8500 0.4550 - 10.9500 0.4550 -
430MHz band SSB 71.2500 10.8500 - 71.3500 10.9500 -
CW 71.2491 10.8491 - 71.3491 10.9491 -
FM 71.2500 10.8500 0.4550 71.3500 10.9500 0.4550
 1200MHz  band*1 SSB 243.8500 10.8500 - 243.9500 10.9500 -
CW 243.8491 10.8491 - 243.9491 10.9491 -
FM  243.8500   10.8500   0.4550   243.9500   10.9500   0.4550 
Sensitivity : SSB,CW     0.11µV (at 10dB S/N)
  FM     0.18µV (at 12dB SINAD)
Squelch sensitivity : SSB,CW     1.00µV (at threshold)
  FM     0.18µV (at threshold)
Selectivity : SSB,CW    More than 2.3kHz/-6dB Less than 4.2kHz/-60dB
  FM    More than 15.0kHz/-6dB Less than 30kHz/-60dB
  FM-N*2    More than 6.0kHz/-6dB Less than 18kHz/-60dB
Spurious rejection ratio : More than 60dB (Except 1200MHz band*1)
Audio output power
(at 13.8V DC)		 : More than 2.0W at 10% distortion with an 8 load
RIT variable range : SSB,CW     1.0kHz (2.0kHz at 1200MHz band*1)
  FM     5.0kHz (10.0kHz at 1200MHz band*1)
External speaker connector : 2-conductor 3.5mm (1/8") 8 connector × 2
  (for MAIN and SUB bands)

*1 An optional UX-910 1200MHZ BAND UNIT is required for 1200MHz operation.
*2 FM-N is not available in 1200MHz band.

Supplied Accessories

  • DC power cable.
  • Spare fuses
  • Hand microphone (HM-12)

All stated specifications are subject to change without notice or obligation.

OPTIONS

PREAMPLIFIERS

  • AG-25/AG-35/AG-1200 WEATHERPROOF PREAMPLIFIERS
    External all-weather, mast-mounting preamplifier for compensating for coaxial cable loss.
    AG-25: for 144MHz band; AG-35: for 430MHz band; AG-1200:for 1200MHz band.

INTERNAL UNITS AND FILTERS

  • FL-132/FL-133 CW NARROW FILTERS
    FL-132 is for the main band; FL-133 is for the sub band operation. Center freq.: 10.8491MHz (FL-132); 10.9491MHz (FL-133) Passband width: 500Hz/-6dB
  • CR-293 HIGH STABILITY CRYSTAL UNIT
    Frequency stability: ±0.5ppm at 0°C to +60°C.
  • UT-102 VOICE SYNTHESIZER UNIT
    Provides audible confirmation of frequency and mode with a clear, electronically-generated voice.
  • UT-106 DSP UNIT
    Provides AF DSP functions, such as noise reduction and auto notch. When 2 units are installed, the DSP function works for MAIN/SUB band simultaneously.
  • UX-910 1200MHz BAND UNIT
    Allows you additional all-mode operation on the 1200MHz band.

MICROPHONES AND SPEAKER

  • HM-12 HAND MICROPHONE
  • SM-20 DESKTOP MICROPHONE
  • SP-7 EXTERNAL SPEAKER (8/5W)

OTHERS

  • CT-17 CI-V LEVEL CONVERTER
  • PS-125 Power Supply
  • IC-MB5 MOBILE MOUNTING BRACKET
  • MB-23 CARRYING HANDLE
 
Automatische Tuner AH-4 CT-17 CI-V Level Converter Breedbandantenne Icom Tafelmicrofoon SM-20 20A voeding van Icom: PS-85
AH-4 CT-17 AH-2b SM-20 PS-85
SP-7 Icom External Speaker (5W 8ohm) SP-10 External Speaker (5W 4ohm) Filters UT-102 Icom Voice Synthesizer Unit
SP-7 SP-10 Filters UT-102 UT-106