|
Stable 65W* output,
144MHz FM and new digital features
65W of output power
A MOS-FET power amplifier provides 65W* of stable output power. A one piece, aluminum chassis helps to keep the transceiver cool and provides durable long-lasting construction.
(* Depending on version.)
Simple operation
The IC-2200H retains a familiar user interface to the IC-2100H. The large tuning dial provides easy access to active channels even without looking at the front panel. Secondary functions are easily recalled by holding the appropriate button.
Optional digital unit, UT-118
The optional UT-118 provides digitally modulated and demodulated clear voice and data communication at 4.8kbps. Store up to 6 of your own callsigns, and up to 6 more from other stations. Or instead of recording a callsign, record any message of up to 20 characters. You may then make a call by sending one of your callsigns or a recorded CQ message. The digital callsign squelch allows you to choose an incoming call selected by the callsign. When connected to an external GPS receiver*, position information may be exchanged with other stations. (* NMEA 0183 output and RS-232C interface are required.)
Dynamic Memory Scan (DMS)
With a total of 207 alphanumeric memory channels, Icom’s exclusive DMS system allows you to scan selected memory banks by simply adding and deleting bank links.
CTCSS and DTCS operation standard
The IC-2200H contains 50 CTCSS and 104×2 DTCS encode/decode plus tone scan functions. The “pocket beep” feature gives you an audible and visual indicator of an incoming call.
 And more……
-
24 DTMF
autodial memories -
DTMF code
squelch and pager function with optional DTMF decoder, UT-108 -
Weather
channel with weather alert function (U.S.A. version only)
-
FM narrow
mode switchable (Depending on version)
-
Selectable
squelch delay -
Built-in
10dB squelch attenuator
SPECIFICATIONS
|
GENERAL |
|
Frequency range (Unit: MHz) |
| : |
|
Version |
Transmit range |
Receiver range |
|
U.S.A. |
144–148 |
118–174*1 |
|
Europe |
144–146 |
118–174*2 |
|
Europe-1 |
144–146 |
144–146 |
|
Taiwan |
144–146 |
144–146 |
|
Korea |
144–146 |
144–146 |
|
Export |
136–174 |
118–174 |
|
*1 Guaranteed range 144-148MHz, *2 Guaranteed range
144-146MHz |
| Mode |
: FM, AM(Rx
only) |
| Number of
memory ch. |
: 207 (incl.,
6 scan edges, 1 call Ch.) |
| Antenna
connector |
: SO-239 (50
ohm) |
| Power supply
requirement |
: 13.8 V DC
±15% (negative ground) |
| Frequency
stability |
: ±10 ppm
–10°C to +60°C |
|
Current drain |
: Tx
Rx |
at
65 W
Standby
Max. audio |
15
A
0.8 A
1.0 A |
|
| Usable temp.
range |
: –10°C to
+60°C |
Dimensions
(projections not included) |
: 140(W) ×
40(H) × 146(D) mm; |
| Weight |
: 1.25 kg |
|
|
TRANSCEIVER |
|
Output power (*approx.) |
: 65, 25*,
10*, 5* W selectable
Korea version
50, 25*, 10*, 5* W selectable
Taiwan version
24, 10*, 5* W selectable
|
| Maximum
frequency |
: ±5.0 /
±2.5kHz deviation (wide/narrow) |
| Spurious
emission |
: Less than
–70 dB |
| Microphone
connector |
: 8-pin
modular (600 ) |
|
|
RECEIVER
|
| Receive
system |
:
Double-conversion superheterodyne system |
|
Intermediate frequencies |
: 1st 21.7
MHz
2nd 450 kHz |
| Receive
Sensitivity (at 12dB SINAD) |
: 0.133µV
typical |
| Squelch
sensitivity |
: 0.100µV
typical (threshold) |
|
Selectivity (wide/narrow) |
: More than
6/3 kHz at -6dB
Less than 14/9 kHz at -60 dB |
Spurious and
image
rejection ratio |
: More than
60dBc typical |
| Audio output
power (at 13.8 V DC) |
: More than
2.4W at 10% distortion with an 8 |
| Ext SP
connector |
: 3-connector
3.5 (d) mm |
Supplied accessories:
- Remote control microphone, HM-133V
- Microphone hanger
- DC power cable, OPC-1132
- Spare fuse
- Mobile mounting bracket kit
All stated specifications are subject to change without
notice or obligation.
OPTIONS
- HM-133V REMOTE CONTROL MICROPHONE
Remote control microphone with keypad backlighting. Same as
supplied.
- HM-118N HAND MICROPHONE
Regular hand microphone.
- HM-118TN/TAN HAND MICROPHONE
DTMF microphones with keypad backlighting.
- OPC-440/OPC-647 MIC EXTENSION CABLES
OPC-440: 5.0 m ; OPC-647: 2.5 m
- OPC-589 MIC ADAPTER CABLE
Allows you to connect a regular 8-pin microphone.
- UT-108 DTMF DECODER UNIT
Provides DTMF decode capability with code squelch and pager
operation.
- UT-118 DIGITAL UNIT
Provides digital voice and data capability at 4.8kbps (Voice +
Data).
- CS-2200H + OPC-478/OPC-478U CLONING SOFTWARE +
CLONING CABLE
For quick and easy programming of memories, etc.
- OPC-474 CLONING CABLE (between transceivers)
- SP-10 EXTERNAL SPEAKER 5W 4
- OPC-441 SPEAKER EXTENSION CABLE: 5.0m
- OPC-1132/OPC-347 DC POWER CABLES
OPC-1132: 3.0 m ; OPC-347: 7.0 m
- MB-17A MOBILE MOUNTING BRACKET
- DV-Dongle coderen en
decoderen
|
 |
 |
 |
 |
 |
|
HM-133V |
HM-118N |
HM-118TN |
OPC-440 |
OPC-647 |
 |
 |
 |
 |
 |
|
OPC-589 |
UT-108 |
UT-118 |
OPC-474 |
OPC-441 |
 |
|
 |
 |
 |
| OPC-347 |
OPC-1132 |
SP-10 |
SP-22 |
MB-17A |
 |
 |
 |
|
|
|
TS-062-801 |
Gear
Keeper |
DV-Dongle |
|
|
|
