Built-in Tone
signaling
Use the built-in CTCSS, DTCS, 2-Tone and 5-Tone capability to set up
your own talk groups and quiet stand-by when others are talking. You can
also set up selective calls to individuals or control a repeater.
Multiple 2-Tone, Multiple 5-Tone Up to 10 2-Tone codes can be decoded on
a single memory channel. This is perfect for professionals who require
multiple district paging on one channel. When a matched tone is received,
the following items are programmable for each code.
• Bell icon • Answer back • Stun • Beep sound • Auto transmit • Scan
Li-Ion battery pack
The large capacity 1700mAh Lithium-Ion (Li-Ion) battery pack, BP-227
provides a practical 10 hours* of operating time.
Li-Ion batteries allow flexible charging and have almost no memory
effect.
* Typical operation Tx:Rx: Stand-by=5:5:90
Up to 7 programmable buttons
The [P0]–[P3], [Red] and [Up], [Down] buttons are programmable to meet
specific needs. The [Red] button on the top panel can be assigned as an
emergency trigger.
Alphanumeric display
The 8-character alphanumeric display shows channel, bank, tone code and
scanning channel names on the display. 7 operational icons on the
sub-line show various status at a glance.
Wide range coverage and large channel capacity
The IC-F51/F61 covers a wide frequency range in one version. The large
capacity of 128 memory channels with 8 memory banks allows you to divide
and store a variety of channels from local to wide area network channels.
Both wide and narrow (25/12.5kHz) channel bandwidth is programmable to
each channel.
Compact body
56(W)×97(H)×36.4(D) mm compact body with durable, dependable
construction, meets MIL standard specifications.
Built-in voice scrambler
The IC-F51/F61 has a built-in inversion type voice scrambler in all
versions. When a more secure system is required, versions with a rolling
type voice scrambler* equivalent to the UT-110 are available.
* Built-in, optional unit not required.
BIIS 1200 Compatible
The following selective calling and data features are available with the
BIIS system.
• 32 abbreviated call memories
• 7 group IDs • 24-status Messages
• 8-character SDM (Short Data Message)
• RS-232C interface
• Position data transmission with a GPS
Waterproof microphone
An optional waterproof speaker-microphone, HM-138 provides reliable
operation, even with the radio securely on your belt.
Other features
- Built-in compander, compatible with the IC-F30G and
IC-F520 series
8 DTMF autodial memories
Powerful 5W output for IC-F50, 4W output for IC-F61
Normal and priority scans
2 step power saver
Optional AA alkaline battery case, BP-226 for battery
back up
Busy, repeater lockout functions
Power ON password, and more...
|
 |
|
|
Applicable U.S.
Military Specifications
Icom makes rugged products that meet MIL-STD requirements and strict
environmental standards as follows.
|
Standard |
MIL 810C |
MIL 810D |
MIL 810E |
MIL 810F |
|
Method |
Proced. |
Method |
Proced. |
Method |
Procedure |
Method |
Procedure |
| Vibration |
514.2 |
X |
514.3 |
I |
514.4 |
I |
514.5 |
I |
| Shock |
516.2 |
I, II,IV |
516.3 |
I, IV |
516.4 |
I,IV |
516.5 |
I,IV |
Measurements made in accordance with EIA-152C/204D, TIA-603.
All stated specifications are subject to change without notice or
obligation.
|
|
|
SPECIFICATIONS
|
GENERAL |
|
Frequency range |
: |
|
IC-F51 |
136-174 MHz (ATEX
146-174 MHz) |
|
IC-F61 |
400-470 MHz |
|
450-520 MHz (General) |
|
Number
of Channels |
: Max. 128 channels/ 8 banks |
|
Channel spacing |
:
12.5/25kHz, 15/30kHz |
|
Antenna impedance |
: 50
Ω (SMA Type) |
|
Frequency error |
: ±2.5ppm |
|
PLL
channel step |
: |
|
IC-F51 |
2.5/3.125Khz |
|
IC-F61 |
5/6.25KHz |
|
Power
supply requirements |
: 7.2V DC |
|
Current drain (approx.) |
: |
|
Transmit |
at 5W |
1.5A
(IC-F51) (niet voor ATEX
versie: norm = 1W) |
|
|
at 4W |
1.5A (IC-F61) (niet voor
ATEX
versie:
norm = 1W) |
|
|
at 1W |
0.7A
(IC-F51) (ook voor ATEX) |
|
|
|
0.8A
(IC-F61) (ook voor ATEX) |
|
Receive |
AF max. |
300mA |
|
|
Stand-by |
85mA |
|
Operating temperature range |
: –30°C to +60°C |
Dimensions (W x H x D)
(projections not included) |
: 56 x 97 x
36.4mm |
|
Weight (approx.) |
: 280g |
|
|
|
TRANSMITTER |
|
Output power |
: IC-F51 |
5.0W
(1.0W voor ATEX) |
|
IC-F61 |
4.0W
(1.0W voor ATEX) |
|
Modulation system |
:
Variable reactance frequency modulation |
|
Max.
frequency deviation |
:
±5kHz (wide) |
|
±2.5kHz (narrow) |
|
Modulation limiting |
:
60-100% of Max. deviation |
|
Audio harmonic distortion |
: 3% typ. (AF 1kHz, 40% deviation) |
|
Spurious emissions |
: 70dB Min. |
|
Adjacent channel power |
: 70dB Min. (wide) |
|
: |
60dB Min. (narrow) |
|
FM Hum
and Noise |
: 46dB typ. (wide) |
| |
40dB
typ. (narrow) |
|
External microphone impedance |
: 9-pin multi connector/2.2k |
| |
|
|
RECEIVER |
|
Sensitivity (12dB SINAD) |
: Less than 0.25 µV |
|
Squelch sensitivity |
: 0.25µV typ. (at threshold) |
|
Adjacent channel selectivity |
: 75dB typ. (wide) |
|
: |
65dB typ. (narrow) |
|
Spurious response |
: 70dB |
|
Intermodulation |
: 74dB typ. |
|
Hum and noise |
: 45db typ. (wide) |
|
: |
40dB
typ. (narrow) |
|
Audio output power |
: 0.5W typ.
at 10% distortion with an 8
load |
|
External SP connector |
: 9-pin multi connector/8 |
|
|
|
Geleverd toebehoren:
-
BP-227 Li-Ion BATTERY PACK
7.2V/1700mAh.
-
Key-sticker
-
Antenne
-
Belt clip
-
Handleiding
|
De IC-F51
ATEX
wordt geleverd met een
BP-227AX
|
|
