F162 serie

De folder in pdf formaat is nog niet beschikbaar

De handleiding in pdf formaat (1839kB)

Designed and built for advanced communication needs, the ICF3162 series handhelds are feature-rich with built-in multiple signalings and LTR™ trunking capability. Two optional slots support numerous extension capabilities including IDAS digital operation*.
* Already installed in IC-F3161DT/DS, F4161DT/DS. Optional UT-126H required

IP54/55 Dust-protection and splash, water jet resistance
The IC-F3162 series meets IP54/55 requirements for dust-protection, splash and water jet resistance. Its durable construction is backed up by the aluminum diecast chassis and polycarbonate casing, allowing reliable operation under harsh weather and environmental conditions.

Lithium-Ion battery pack
Supplied 2000mAh Li-Ion battery pack, BP- 232, provides 14 hours* of operating time. Icom’s rugged dual-rail guide securely locks the battery to the radio. Optional battery case BP-240 provides a convenient back up and great reassurance in an emergency.
* Typical operation Tx:Rx:Stand-by=5:5:90, power save on.

Basic LTR™ mode operation
Group, selective, and phone call are available in LTR™ mode.

512 memory channels with 128 zones
The 512 memory channel capacity with 128 zones allows you to divide and store a variety of channel groupings for versatile and efficient fleet management.

IDAS, 6.25kHz digital mode ready
The IDAS 6.25kHz digital mode is available with the optional UT-126H digital unit.

Full dot-matrix LCD
Using a large full dot-matrix LCD (32 × 18 mm), the IC-F3062 series shows upper and lower case characters clearly. The display setting is selectable from 1 line, 12 characters or 2 lines 24 characters via programming. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Voting mode scanning
The Voting mode scanning detects the Smeter level of repeater stations and automatically selects the strongest station, useful for roaming between 2 or more repeater sites. In addition, the IC-F3162 series has 10 scanning modes including priority scan and double priority scan.

Enhanced audio
The IC-F3062 series employs a BTL amplifier that increases the audio output and the built-in audio compander provides clear, low noise communications.

Built-in inversion-type voice scrambler
The built-in inversion type voice scrambler provides secure conversation as standard. When a more secure system is required, the 32 code non-rolling-type voice scrambler UT-109R and 1020 code rolling type UT-110R are available as an option.

Lone worker function
When the radio is not operated for a preset period (1 to 255 minutes), the radio sounds a beep and requires you to push a button. If a button is not pushed, an emergency signal is automatically transmitted and informs a co-worker or dispatcher that something may have happened to the individual worker.

BIIS 1200 compatible
The following selective calling and data features are available with the built-in BIIS system.

Optional man down unit, UT-124R and lone worker function
The mode independent setting automatically selects the scanning list, according to the operating channel
Nuisance delete
MDC 1200 compatible
Embedded ESN (Electronic serial number) and more...

SPECIFICATIONS

GENERAL

Frequency range

IC-F3162T/S	136–174MHz
IC-F4162T/S	400–470MHz

Number of channels

512 channels/128 zones

Channel spacing

12.5kHz/20kHz/25kHz / 6.25 (option) kHz

PLL channel step

2.5kHz, 3.125kHz

Antenna impedance

50Ω

Usable temperature range

–25°C to + 55°C

Power supply requirement

7.2V DC

Current drain
(at 7.2V DC; approx.)

Transmit	VHF/UHF	1.5A/1.8A (at 5W/5W)
Receive	stand-by	150mA
	rated output	600mA

Dimensions (with BP-232)(projections are not included)

53 (W) ×136 (H) ×38.9 (D) mm

Weight (approx.)

340g (with BP-232N)

TRANSMITTER

Output power	:	5W (VHF), 5W (UHF)
Max. frequency deviation	:	±5kHz (Wide) ±4.0kHz (Wide) ±2.5kHz (Narrow)
Frequency error	:	±1.0ppm
Spurious emissions	:	0.25μW (1GHz), 1.0μW (>1GHz)
Adjacent channel power	:	80dB typ. (Wide), 70dB typ. (Narrow)
Audio harmonic distortion	:	3% typ. (AF 1kHz, 40% deviation)
Modulation limiting	:	60–100% of max. deviation
External microphone connector	:	9-pin multi connector/ 2.2kΩ

RECEIVER

Intermediate frequency

1st	46.35MHz
2nd	450kHz

Sensitivity

–4dBμV typ. (emf, at 20dB SINAD)

Squelch sensitivity

–4dBμV typ. (emf, at threshold)

Adjacent channel selectivity

75/75/68dB typ. (Wide/middle/narrow)

Spurious response

70dB min.

Intermodulation

67dB typ.

Hum and noise ratio
(with CCITT filter)

55/53/50dB typ. (Wide/middle/narrow)

Audio output power

500mW typ. (at 5% distortion with an 8Ω load)

External speaker connector

9-pin multi connector/ 8Ω

Measurements made in accordance with EN 300-086.
All stated specifications are subject to change without notice or obligation.

LTR is a registered trademark of E.F. Johnson Company. All other trademarks are the properties of their respective holders.

Supplied accessories

VHF Antenna
UHF Antenna
Battery pack, BP-232
Belt clip, MB-94

OPTIONS

BATTERY PACKS AND CASE

Battery packs	Type and capacity	Operating time*	Output power
BP-230	Li-Ion 7.4V/ 800mAh	6 hours	5W
BP-231	Li-Ion 7.4V/1150mAh	8 hours	5W
BP-232	Li-Ion 7.4V/2000mAh	14 hours	5W
BP-240	AAA (LR03) batteries × 6	–	1W

* Operating time is approximate time (at 20°C). Tx: Rx: standby=5:5:90. Power save on.

BATTERY CHARGERS

BC-171 DESKTOP CHARGER + BC-147 AC ADAPTER: Charges the battery pack in 8–10 hours (approx.).
BC-160 DESKTOP CHARGER + BC-145 AC ADAPTER: Charges the BP-232 in 3 hours (approx.).
BC-121N MULTI-CHARGER + AD-106 CHARGER ADAPTER + BC-157 AC ADAPTER: Rapidly charges up to 6 battery packs (Six AD-106s are required). Charging time: 3 hours (approx.) when BP-232 is attached. OPC-656 DC POWER CABLE :For use with the BC-121N. (12–20V DC required).

POWER SUPPLY CABLES

CP-17L: CIGARETTE LIGHTER CABLE.
OPC-515L: DC POWER CABLE For use with the BC-160 or BC-119N. (12–16V DC required).
OPC-656: DC POWER CABLE :For use with the BC-121N. (12–20V DC required).

BELT CLIPS AND LEATHER BELT HANGERS

MB-93: Swivel type belt clip
MB-94: Alligator type. Same as suppliednbsp;
MB-96N: Swivel type belt hanger
MB-96F: Fixed type belt hanger

SPEAKER-MICROPHONES / HEADSETS and PTT/VOX UNIT

HM-131SC: Compact type speaker microphone
HM-159SC: Full size durable speaker microphone with revolving clip
HM-168: IPX7
HM-169: IP57
HM-170GP: IP57 With GPS receiver
HS-94: Earhook headset with flexible boom microphone
HS-95: Behind-the-head headset with flexible boom microphone
HS-97: Throat microphone fits around your neck and picks up speech vibration
VS-1SC: PTT/VOX unit. Required when using these headsets with the transceiver
SP-13 EARPHONE + AD-52 EARPHONE ADAPTER Provides clear audio even in noisy environments
AD-52: Earphone Adaptor