Vorige Omhoog Volgende

 Startpagina

Prijslijst

IC-F110S / F210S
Vergelijkingstabel

F110 Simple SerieHandleiding (1100Kb)Folder (201Kb)

The IC-F100 simple series comprises the:

IC-F110s VHF (136-174 MHZ) 32 channels
IC-F210s VHF (400-430 or 440-470 MHZ) 32 channels
 

  • Simple Operation with Large Buttons and Volume Knob

  • 4 Watts (typ.) Front-mounted Speaker

  • 8 Memory Channels with LED Display

  • User Programmable LED lighting and Various Hanger Actions

  • Built-in 5-tone, 2-tone, CTCSS, DTCS Encoder & Decoder

  • Advanced Multi 5-tone/2-tone Systems

  • Standard DTMF Encoder and Optional DTMF Decoder with ANI Function

  • Programmable Wide/Narrow Channel

ADDITIONAL FEATURES

Advanced Multi 5-tone/2-tone systems
  • Programmable actions when a matched tone is received
    • LED lighting ON/OFF/Blink
    • Answer back calls
    • Beep sounds
    • Scan Start/Stop
    • Auto transmission
    • Stun/Kill functions (prevents use of a lost or stolen radio)
    • External out for horn drive (Optional OPC-617 is required)
  • Eight 5-tone codes or ten 2-tone codes can be decoded on a channel
  • Three Call codes are programmable

Other features

  • Hook scan function and Hook scan ON/OFF button are assignable
  • 24-digit DTMF autodial memory
  • Automatic ID (DTMF code) transmission linked to PTT
  • Busy lockout and repeater lockout
  • Power on password
  • Reduced length (117.5mm) allows for easier installation
  • External I/O terminal socket with optional OPC-617
SPECIFICATIONS
 
GENERAL
Frequency coverage (Unit; MHz) : IC-F110S   136-174
  IC-F210S   400-430  440-490
No. of channels : 8 ch (4 channels × 2 banks)
Channel spacing (KHz) : 12.5/25／12.5/20  
PLL channel step (KHz) : 2.5, 3.125(VHF) 5, 6.25 (UHF)
Power supply requirement : 13.2 V DC ±15% (neg. ground)
Current drain (at 13.2 V DC)
: At      25 W
  Squelched
  Max. audio output		    7 A
 300 mA
 1.2 A
Dimensions (proj. not incl.) : 150(W) × 40(H) × 117.5(D) mm
Weight : 800 g
 TRANSMITTER
Output power :  25 W (at 13.2 V DC)
Adjacent channel power (wide/middle/narrow) : 70/70/60 dB
Spurious emissions : 0.25 µW (below 1GHz)
 RECEIVER
Sensitivity (20 dB SINAD) : -4 dBµV typ. (emf)
Adj. channel selectivity (wide/middle/narrow) : 75/75/65 dB typ. 
Intermodulation rejection : 67 dB typ. (wide)
Spurious response rejection : 75 dB
Audio output power : 4 W typ. at 10% distortion with a 4 ohm load

Applicable U.S. Military Specifications
Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810C MIL 810D MIL 810E
Method Procedure Method Procedure Method Procedure
Vibration 514.2 VIII, X 514.3 I 514.4 I
Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV

Measurements made in accordance with EIA-152C/204D, TIA-603. All stated specifications are subject to change without notice or obligation.

OPTIONS
  • OPC-617 ACC CABLE
    For external terminal connection.
  • HM-100TN HAND/DTMF MICROPHONE
  • SM-25 DESKTOP MICROPHONE
  • SP-5/SP-10/SP-22 EXTERNAL SPEAKERS
    Input impedance: 4; Max. input power: 5 W.
  • UT-108 DTMF DECODER UNIT
    Provides DTMF decode and ANI capabilities.
  • UT-109(Ver.02)/UT-110(Ver.02) VOICE SCRAMBLER UNITS
    Provides operating security. Ask your dealer for details about usable version, etc.
    UT-109: Provides operating security. Up to 32 scrambling codes are available.
    UT-110: Provides higher operating security. Up to 1020 (255 codes × 4 groups) scrambling
                 codes are available.
  • OPC-1122 cloning cable

 
HM-100TN SM-25 SP-5 SP-10 SP-22
UT-105 UT-108 UT-109 UT-110 UT-111
    Ophanging Microfoon Gear Keeper
OPC-617 OPC-1122     Gear Keeper