-inch,
multi-function LCD
The Icom IC-R9000L is made extremely efficient with the instalment of a
unique 5- inch LCD display. This multi-function LCD display shows
operating status at a glance. Superior contrast and backlighting make
viewing easy on your eyes and yet maintains readability. The LCD
indicates monitoring details (frequency, mode, etc), as well as
including Spectrum scope, Memory list, Terminal monitor and more.
Continuous, all mode coverage
The IC-R9000L's versatile receive capability enables you to receive many
mode signals. With the wide frequency coverage of 100 kHz to 1999.8
MHz*1 you can tune into AM used by broadcasting stations and VHF air
band. Use SSB (USB, LSB) and CW to receive marine band, aircraft and
amateur stations on short-wave. Listen to many businesses, emergency
services, government and amateur stations using FM on VHF and UHF. Or
use wide FM to receive FM broadcasts and TV stations. FSK (Frequency
Shift Keying) is also built in for receiving RTTY from news agencies.
Hear the diversity of the world in detail!.
Watch the IC-R9000L! With a simple connection to a TV set or
video recorder with a video input connector you are able to watch VHF,
UHF TV broadcasts*2 and receive ATV (amateur television) on both the
430(440) and 1200 MHz amateur bands.
*1 Some versions do not cover the entire range.
*2 NTSC system only.
Excellent performance
Advanced RF circuits ensure an improved dynamic range of 103.5 dB* and
can receive desired weak signals even when strong signals are on nearby
frequencies. For frequencies higher than 30 MHz, the front end circuits
have tuned bandpass filters with Ga-As FETS and other high-performance
circuits. Experience high sensitivity in all frequencies.
* On 14 MHz band, CW-narrow mode, IF passband width 500 Hz / -6dB.
Superior PLL C/N characteristics
The PLL C/N characteristics of the ICR9000L are in a class of their own.
Sensitivity and selectivity in receiving frequencies are both highly
advanced and the blocking performance is predominate. With the
utilization of the DDS (Direct Digital Synthesizer), C/N characteristics
ensure fast PLL lock-up and effective scanning. Minimum tuning steps of
10 Hz for frequency coverage make all tuning easy.
High frequency stability
Another Icom achievement is the ICR9000L's very high frequency stability
in the difficult to manage GHz range. Frequency stability is ±0.25 ppm*
in ranges greater than 30 MHz and ±25 Hz* in ranges below 30 MHz.
* 0°C to 50°C; +32°F to +122°F
1000 memory channels
1000 memory channels store frequencies, modes, filter width and tuning
steps. Memory channels are grouped into 10 memory banks. Use the memory
banks according to station type, mode, frequency range, or what ever
your preference. Assign a name or note to each memory channel for easy
reference. (up to an eight character capacity)
RF attenuator
A 10, 20 and 30 dB level-selectable RF attenuator prevents any
saturation of RF circuits from excessively strong signals.
Advanced S-meter squelch
Icomfs all-mode S-meter squelch is built in to ignore weaker signals
while scanning, standing-by, and concentrates on receiving only signals
stronger than the preset level.
AFC function
An advanced AFC function automatically tunes to the frequency of the
signal in each FM mode. Is useful, for example, when receiving amateur
stations in the 1200 MHz band. AFC also compensates for frequency shifts
in weather satellite signals due to the Doppler Effect.
Memory editor function
The super convenient memory editor function makes it easy to move, copy
or delete memories at any time on the LCD display.
Interference elimination circuits
The IF shift circuit shifts the center frequency of the passband to
effectively reject nearby interfering signals in the SSB, CW, FSK and AM
modes. A threshold-adjustable, width-selectable noise blanker is
included for eliminating long duration pulse-type noises such as "woodpecker."
The deep notch filter can be tuned to a particular frequency in the IF
passband, eliminating interfering signal. These functions ensure clear
reception even during crowded band conditions.
Multi-scan functions
Numerous scanning functions searching desired stations are available to
make your operations easier than ever before.
- Programmed scan
- F scan
- Priority scan
- Memory scan
- Selected mode memory scan
- Selected number memory scan
- Auto memory write scan
Additional outstanding features
- VSC (Voice Scan Control)
- Direct keyboard entry for memory channels and frequencies
- Wide variety of tuning steps
- Dial lock function
- Dual clocks with sleep / daily timers
- Bass and treble tone control
and more...
SPECTRUM SCOPE SCREEN
At a glance, observe the signal spectrum of nearby receive frequencies.
The span of the spectrum scope can be selected for ±25, ±50 or ±100
kHz according to your needs.
MEMORY EDITOR SCREEN
Memory editor screen has the flexibility to move, change, delete, or
copy any of the 1000 memory channels to better locations. Simple and
convenient memory management.
SCAN CONDITION SCREEN
Each scan condition can be immediately checked in detail and set on the
LCD display.
DAILY TIMER SET SCREEN
Program six independent sessions - specifying day, time, and memory
channel to tune.
|
Archief
